Spun Concrete Pole Accessories
1. Pole Band
Pole bond is also called the universal band.
It is used to support and connect the stay wire to let the stay run through the spun pole.
The pole band is usually finished with hot dip galvanized more than 86 micron and made with carbon steel material.
2. Street Light Bracket-Long Arm
Street light brackets are an essential part of street lighting systems. They provide the support and mounting necessary for street lights to illuminate our streets and roadways.
There are two main types of street light brackets: long arm and short arm. Long arm brackets are typically used for street lights that need to be mounted higher off the ground, such as those on highways and major roads.
Street light brackets are made from a variety of materials, including steel, aluminum, and stainless steel. The type of material used will depend on the specific application and the environmental conditions that the bracket will be exposed to.
For example, steel brackets are typically used in areas with high winds, while aluminum brackets are typically used in areas with corrosive environments.
Street light brackets are an important part of our infrastructure. They provide the support and mounting necessary for street lights to illuminate our streets and roadways.
3. Hexagon Head Bolt and Nut
Hexagon head bolts and nuts are commonly used to secure the components of spun concrete poles. The bolts are inserted through the holes in the pole and the nuts are threaded onto the bolts.
The nuts are then tightened with a wrench or socket wrench to secure the components together.
The type of hexagon head bolt and nut used for spun concrete poles will depend on the size and weight of the pole.
For smaller poles, a standard hexagon head bolt and nut may be sufficient. For larger poles, a heavier-duty bolt and nut may be required.
The material of the hexagon head bolt and nut will also depend on the application.
For poles that will be exposed to the elements, stainless steel or galvanized bolts and nuts should be used.
For poles that will be used in a corrosive environment, such as near the ocean, special corrosion-resistant bolts and nuts should be used.
4. HV Dead End Double Clamp Bracket
The HV Dead End Double Clamp Bracket is a high-voltage electrical accessory used to anchor two HV dead-end clamps on 10m-19-5kN spun concrete distribution or section poles or terminal poles.
It is made of high-quality materials and is capable of withstanding a minimum breaking load of 62kN for 1 minute or 31kN per circuit for 1 minute.
The HV Dead End Double Clamp Bracket is a critical component of high-voltage electrical systems.
It helps to ensure the safe and reliable operation of these systems by providing a secure anchor point for the HV dead-end clamps.
The bracket is also designed to withstand the high forces that can be generated during an electrical fault.
If you’re working with high-voltage systems, the HV Dead End Double Clamp Bracket is a valuable asset that can help to improve safety, reliability, and cost-effectiveness.
5. Triangular Bracket for HV ABC
The Triangular Bracket for HV ABC is a high-voltage electrical accessory used to anchor an HV insulated suspension clamp in the 11kV and 33kV insulated aerial bundled cable system (ABC).
It is made of high-quality materials and is capable of withstanding a minimum breaking load of 62kN for 1 minute or 31kN per circuit for 1 minute.
The Triangular Bracket for HV ABC is a critical component of high-voltage electrical systems.
It helps to ensure the safe and reliable operation of these systems by providing a secure anchor point for the HV insulated suspension clamp.
The bracket is also designed to withstand the high forces that can be generated during an electrical fault.
The Triangular Bracket for HV ABC is a simple yet effective way to anchor HV insulated suspension clamps on spun concrete poles.
It is a critical component of high-voltage electrical systems and helps to ensure the safe and reliable operation of these systems.
The shape of the bracket is triangular, designed to be mounted on a spun concrete pole.
The bracket has two holes for mounting the HV insulated suspension clamp. It’s easy to install and can be done with basic tools.
The bracket is a cost-effective way to anchor HV insulated suspension clamps on spun concrete poles.
Related Article: Spun Concrete Pole; What Most People Don’t Know About It.
6. ABC Suspension Hook
The ABC Suspension Hook is a low-voltage spun concrete pole accessory used to hang or suspend aerial bundled cable accessories such as suspension clamp and Dead End Clamp.
It is made of high-quality materials and is capable of withstanding a minimum breaking load of 10kN for 1 minute.
The ABC Suspension Hook is a simple yet effective way to hang or suspend aerial bundled cable accessories on spun concrete poles.
It is a critical component of low-voltage electrical systems and helps to ensure the safe and reliable operation of these systems.
7. Stay Bow with Thimble
A stay bow with thimble is the accessory necessary in the High Voltage Aerial Bundle Cable (HV ABC) Distribution System.
The mild steel galvanized stay bow & thimble is designed for use as an accessory for HV ABC stay wire installations. It is suitable for 2500mm x19mm stay rod and up to Grade 700 SWG 7/8 stay wire.
Stay Bow with Thimble is galvanized with mild steel so that it can withstand a minimum breaking load of 62kn.
Its generic characteristic is that it has a curved shape and is designed to be mounted on a spun concrete pole and has a hole for the stay wire.
8. D Bracket
The D bracket is made from 38x6mm thickness mild steel flat with hole diameter 175mm for 16mm diameter bolts.
The D bracket is hot dip galvanized according to BS729.
9. Stay Rod and Stay Plate
Stay rod and stay plate is made by hot forged.
There are a few sizes of rod diameters that can be developed according to customer’s demand, such as 12mm, 16mm, 18mm, 20mm, and 22mm.
The stay plate middle square hole is fit for the stay rod square head. The stay plate is used together with the stay rod to stop the stay rod from moving.
It is placed under the ground to act as the base supporting plate.
Why You Need To Choose Suitable Accessories For Spun Concrete Pole
For every type of spun concrete pole, you should consider choosing the right accessory to ensure it’s functionally to the best.
For instance, each specific application of a pole required different accessories, such as lighting or signage.
Plus, some accessories offer additional features, such as corrosion protection or vandal resistance.
In conclusion, there are a variety of accessories available for spun concrete poles that can help to improve their functionality and safety.
When choosing accessories for spun concrete poles, it is important to consider the specific application and the desired features.
By carefully selecting the right accessories, spun concrete poles can provide many years of reliable service.
If you’re searching for spun concrete pole accessories, Setia UrusHarta is just the right place to offer for you.
In addition to that they also offer spun concrete pole installation service!
For more inquiries, find out more by clicking this link.